KME DIVER'S HARNESS
BELL STYLE
WITH
BAIL OUT BOTTLE
BACKPACK
The KME AC-4925 Bell style Diver's Harness with Bail-Out Bottle Back
Pack built into the back of the harness is constructed as follows:
1. The Webbing is Heavy Duty Nylon, rated at 2,000 lb. (1000kg.) tensile
strength. The webbing is 2 inches (5.08 cm.) wide and it is woven
to a hard finish that will not go limp in the water, making it easy to
find by feel and grip even with heavy gloves on.
2. This harness is assembled using parachute sewing, rated at 5,000
pounds (2,500 kg.) tensile strength. The thread is # 415 nylon for
longer life and greater abrasion resistance if used in sandy
working conditions, such as hand jetting.
3. The Stainless Steel D-Rings are made of 1/4 " (6.5 mm) diameter
304 stainless wire, and are welded using a proprietary "normalizing"
process to eliminate carbon precipitation. The breaking strength of
the welds is over 8,000 lb. (4000 kg.).
4. The style of KME harnesses is traditional, but the fabrication methods
were custom designed for us by a parachute manufacturer's
designer to be stronger than the webbing itself.
KME's Diver's Harnesses come in the sizes Small, Medium, Large, and
Extra Large, but we also do custom sizing for the larger divers.
BACK TO COMMERCIAL ACCESSORIES
