AC-4935 NORTH SEA DIVER'S HARNESS

NORTH SEA STYLE

COMMERCIAL DIVER'S

SAFETY HARNESS

WITH

BUILT IN BAIL-OUT BOTTLE

BACK PACK

The KME AC-4935 NORTH SEA style DIVER'S HARNESS with BAIL OUT

BOTTLE BACK PACK built into the back of the harness is constructed as

follows:

1. The WEBBING is Heavy Duty Nylon, rated at 2,000 lb. (1,000 kg.) tensile

strength. The Webbing is 2" (5.08 cm) wide and is woven with a hard

finish that will not go limp in the water, making it easy to find by feel and

grip, even with heavy gloves on.

2. Each Harness is assembled using parachute sewing, rated at 5000 lb.

(2500 kg.) tensile strength. The thread is # 415 Nylon for longer life and

greater abrasion resistance if used in sandy working conditions, such

as hand jetting.

3. The Stainless Steel D-Rings are made of 1/4" (6.5 mm.) diameter, 304

grade Stainless wire and are welded using a proprietary "normalizing"

process to eliminate carbon precipitation. The breaking strength of

the welds is over 8,000 lb. (4,000 kg.).

4. The style of KME Diver's Harnesses is traditional, but the fabrication

methods were custom designed for us by a parachute manufacturer

to be stronger than the webbing itself.

KME's Diver's Harnesses are available in the sizes Small, Medium, Large,

and Extra Large, but we also do custom sizing for the larger divers and we

also do custom configurations.

KME manufactures a specialized version of the North Sea harness

for some diving companies that specialize in nuclear plant work in

the fuel rod storage pools. Harnesses with rivets are not allowed

to be used in many of these plants and sewn harnesses are.

Contact KME for details.